Add Android Authority on Google:
When fall arrives, most people use their outdoor pools less, but many wait for the colder weather to set in before closing them for the season. Even if you’re not swimming that often, leaves, seed pods, dust, and other debris still fall into the pool and settle at the bottom. With iGarden, you don’t have to be the one to clean it out.
The iGarden Pool Cleaner K70 is a cordless robot that cleans your pool for you. It handles the floor, walls, and waterline by itself, runs for up to seven hours on a single charge, and can stay in the pool on a set schedule. And with a big discount for Prime Big Deal Days, now is a great time to get one. Here’s what you should know.
Suction, scrubbing, and filtration for leaves and fine dust
The iGarden Pool Cleaner K70 uses three brushless motors and a turbine-style impeller to move up to 22,000 liters of water per hour, or about 5,800 gallons. If your pool is full of leaves, Turbo 200% Mode increases suction to handle heavy debris. But for regular cleaning, Standard mode is more than up to the task and uses less battery.
Two rubber brushes scrub away grime as the robot moves, and anti-slip tracks help it climb walls, slopes, and steps. At the waterline, the K70 reaches about 2 inches above the surface to clean off the oily ring, so you don’t have to scrub it by hand.
The 4L debris basket uses a dual-layer filtration setup. The 180-micron standard filter handles the big stuff, including leaves, twigs, and pebbles, which makes it the one to use after a windy day. Add the 50-micron ultra-fine filter, and the robot also catches sand, pollen, fine dust, and algae particles. After each cleaning cycle, you simply empty the basket, rinse it under a hose, and slot it back in.
Navigation, battery life, and scheduling
The iGarden K70 offers four cleaning modes: floor only, wall and waterline only, wall and waterline first then floor, and full coverage. It uses 3D S-Path navigation to move through the pool in organized passes and adjusts its route as needed. AI-Inverter technology adjusts power output based on how much cleaning is needed, saving battery in easy areas and working harder when it finds more debris.
The K70 is completely cordless, so you don’t have to deal with tangled cables after cleaning. On a full charge, floor-only mode runs up to 7 hours, while full coverage with walls and waterline lasts up to 3.75 hours.
Instead of running the robot for one long session, you can schedule it to clean every 24, 48, or 72 hours while it stays in the pool. For example, if you set it for an hour-long floor cleaning every three days, the battery can last up to 12 days on one charge. Shorter, more frequent cleanings work better in the fall, since leaves keep falling. You can also choose a cycle length of 1, 1.5, or 2 hours, or let it run until the battery runs out.
Easy controls and broad pool compatibility
The K70 has a touchscreen on the robot, so you can pick a mode and start cleaning without using your phone. You can also connect to the iGarden Robotics app via Wi-Fi or Bluetooth to configure cleaning modes poolside; once set, just drop it into the water. Important note: there’s no signal underwater, so app control only works on land.
The K70 works in both in-ground and above-ground pools, no matter the shape – rectangle, circle, kidney, or something freeform. It supports surfaces like concrete, fiberglass, mosaic tile, stainless steel, and the vinyl liners found in many above-ground pools. The K70 can handle pools up to about 20 by 39 feet and depths from 3.3 to 8.2 feet.
The K70’s operating range is useful in the fall. It works in water temperatures from 39.2°F to 95°F, so it keeps cleaning as the water gets colder later in the season.
Get the iGarden Pool Cleaner K70 now
The iGarden Pool Cleaner K70 offers up to 7 hours of battery life, a handy scheduler, 22,000 LPH suction with turbo boost, and dual-layer filtration for both large leaves and fine dust. It cleans the pool floor and tile line, and you can control it from the touchscreen or the app.
The K70 is a great choice if your pool is under trees that drop leaves for weeks, or if you want it clean before closing in November. It’s also good for families in warmer states who swim into fall, or for anyone who wants a clean pool after being away on weekends.
You can get the iGarden Pool Cleaner K70 on Amazon for $749.99, reduced from its regular price of $1,299.99. That’s a $550 savings (42% off) during Amazon’s October Prime Big Deal Days on October 6 and 7. It is also available directly from iGarden.
